12V 30A Smart Charger:
Description:
1. Suitable for 4 kinds of batteries (lithium battery, lead-acid, gel, open battery).
2.
Fully automatic charging: In order to continuously charge the battery,
the controller can always be connected to the on-board battery. When the
charging energy is stopped, such as when the car stops driving or there
is no sun at night, the battery will not discharge in reverse.
3. Safe and intelligent charging, multiple protections (overcharge, overdischarge, overheating, reverse polarity protection).
4. An external temperature sensor can be used for charging compensation under different temperature conditions.
5.
The charging indicator can be installed externally. When the large
current is discharged, the starting battery and the main battery will
automatically be used in parallel.
Features:
This is
a fully automatic charger that can use the battery (12V) to charge the
battery (12V) (B2B), a power supply system designed specifically for
RVs, campers, ships, etc.
B2B charging: Refers to charging the
main battery through the car generator and starting battery. If it is
not used in the car, you can also use one battery (12V) to charge
another battery (12V).
1. When the car is running, the car generator can quickly charge the main battery through the controller at full power.
2.The
controller can charge the main battery according to the specified
current by boosting or stepping down, ensuring that the main battery is
charged according to the standard charging curve.
B2B1230: 12V-12V/30A
Specification:
Model: BS123020
B2B charging: 12V-12V/30A,
MPPT solar charging: 12V/20A, 250W
Model: B2B1230
Main Battery: 12V
Main battery type: GEL. Sealed, LiFePO4, Lithium-ionV
Vehicle starter battery: 12V
Starter battery type: lead-acid
Max.charging power: 390W
Main battery max, charger current: 30A
Self-consumption current: 24mA
Dimension: about 190*197*70mm/7.48*7.76*2.76inch
Weight: about 1.44kg
Installation Notes:
1.
Please install the charge controller as close to the main battery as
possible, and keep the surrounding clean, tidy and well ventilated. To
be installed on a hard surface.
2. It must be installed in a moisture-proof, waterproof and corrosion-proof place.
3.
When the charging controller is working, the fan will bring out heat,
so when installing, make sure to leave at least >10cm behind the
charger controller.
4. According to the table, select the
specification of the connecting wire, the length and the specification
of the fuse. Reverse connection of the battery will cause serious damage
to the equipment.
Blue-tooth Accessories:
Features:
This
Blue-tooth module is an accessory of the solar controller. When the
user needs to display the working parameters of the controller through
the APP, the Blue-tooth module needs to be purchased separately, and the
controller sends the working parameters to the mobile phone through the
Blue-tooth module, through a dedicated APP show.
Connection method:
Insert
the connection line of the Blue-tooth module into the dedicated
Blue-tooth interface of the solar controller with Blue-tooth
communication function, and then fix the module in any position.
Note:
The Blue-tooth module cannot be installed in a metal shielded place,
and the distance from the mobile phone is less than 10 meters
Notes:
1. Mobile phone operating system requirements: for Android version 5.0 or above, for IOS version iphone4.0 or above.
2. The Blue-tooth adapter cannot be installed in a metal shielded environment
3. Make sure that the Blue-tooth function and location information of the mobile phone are turned on
4.
The APP must be run before the device is connected, the APP will
automatically search for the device, click the device name to connect to
Blue-tooth
5. The distance between the Blue-tooth adapter and the
mobile phone must be less than 106. Only one mobile phone is allowed to
connect to Blue-tooth at the same time, and the mobile phone needs to
be connected, and the connected mobile phone must be exited from the APP
7. Some mobile phones may need to search repeatedly to find the device
Specification:
Model: BT10
Blue-tooth version: Blue-tooth 4.2
Working voltage: 5V (provided by the controller)
Standby power consumption: <500uA
Length of connection line: 3 meters
Blue-tooth distance <10 meters
Interface type XH2.54-4P
Size: about 67*35*20mm/2.64*1.38*0.79inch
APP name: Charger Connect
Packing List:
1*12V 30A Smart Charger
1*Bluetooth Module(Need customers to buy)option
1*Temperature Sensor(Need customers to buy)option
1*manual