Designed for use with an electric hand drill, the RLMPDP is self-priming and connects to 3/4-inch standard garden hoses. Ideal for removing oil, draining sinks, water heaters, aquariums, etc. The power of this pump is directly related to the power of the drill. A 2500 RPM electric drill is recommended as battery powered drills charging capabilities can lessen over time and the drill may not perform at full expectation and could affect the performance of the RLMPDP drill pump.
The Red Lion RLMPDP Drill Pump is a great tool around the house and garage. This little devise is ideal for removing oil from lawn mowers, draining plugged sinks, tubs, or dishwashers, emptying water heaters, draining aquariums or draining other shallow areas.
DO NOT USE FOR PUMPING FUEL.
Transferring oil and other liquids is now even easier.
The RLMPDP-KIT comes with 32 inches of GARDEN HOSE, 32 inches of 1/4-inch O.D. TUBING and an adapter for the tubing. The length of the hose and tubing provide optimal performance for this pump when used with a 2500 RPM drill.
The Red Lion RLMPDP self-priming pump plugs into a standard drill (2500 RPM recommended) just like a drill bit. The drill rotates the impeller inside, causing suction.
At 2500 RPM, the pump has been tested to deliver 154 GPH.
The RLMPDP is a great accessory for the home and is perfect for removing oil, draining a sink, dishwasher, aquariums or other shallow areas. Note: DO NOT USE FOR PUMING FUEL.
The RLMPDP is designed for use with 3/4-inch standard garden hose. Attach a standard 3/4-inch garden hoses to each end. Start up the drill in the forward position and at top speed and voila, the pump should start pumping immediately.
Tip: Use a 32-inch garden hose (or shorter) on the inlet (marked "IN") which will make priming easier. The discharge hose can be any length.
Garden hose not included with the RLMPDP (part # 14942013).
The RLMPDP-KIT (part # 14942022) comes with the following:
The length of the hose and tubing provide optimal performance for this pump when used with a 2500 RPM drill. Either the tubing or hose can be installed in the inlet port marked "IN".
TUBING INSTALLATION
The tubing attaches to the adapter and the adapter is installed inside the suction inlet (marked "IN"). Either the 32-inch hose or a standard garden hose (if a longer reach is necessary) can be installed on the discharge port.
Visit the RED LION STORE (see link at the top of the page) and shop for similar pumps under the UTILITY category.
Backed by the heritage of a global leader in the development and manufacturing of systems and components that move water, the RED LION brand remains at the forefront of product innovation by listening to its customers, adapting to the market, and continuing to invest in research and development. This innovative product portfolio is supported by unparalleled service to provide you with current solutions to your water pumping challenges.