|
|
|
|
AT278
|
AT226-C
|
Length Measurement - Working Theory |
TDR | Capacity |
Length Measurement - Cable Types |
Cat5e,cat6,cat7,telephone cable, coax cable, power cable | Cat5e,cat6,telephone cable,coax cable |
Length Measurement - Fault Distance |
1. Measure cable breakage & short distance. 2. Breaks or shorts in multi-pins can also be measured accurately | 1. Measure cable breakage, NOT short distance. 2. breakage distance cannot be measured accurately if broken pins > 2 |
Length Measurement - Testing Modes |
1. Measure with main unit locally 2. measure with main & remote unit | Only measure with main unit locally |
Length Measurement - Calibration |
Use/unuse button to open or close the calibration data, no need to load the data again. Use: based on new calibrated data. Unuse: based on factory clibration data. | 9 sets of calibration data can be saved, users need to load the data after calibration |
Wire Mapping - Testing Modes |
Measure with main & remote unit | 1. Measure with main unit and remotes 2. measure with main unit locally (RJ45 MAIN + RJ45 SCAN) |
Wire Mapping - Display |
Wiremap with faulty pins and distance | Wiremap only with faulty pins, NOT fault distance |
PING - Protocol Compatiblity |
More fit for different brands of routers | Not fit for some brands of routers sometimes |
Memory - Data Save & Export |
1. Data can be saved into TF card and export to PC. 2. Data can be deleted by function types. | 1.Data can be saved into TF card and export to PC. 2.Data cannot be deleted,can only be replaced after 160 sets. |
Remote Qty |
1 set | 8 set |